Regulating equipment is the human use of chip through to the e cigs factory battery output pressure and reduced pressure regulating methods for e cigs factory, the use of this model is kang thayer heat wire as the main material, kang thayer heat wire is one of the most stable market now hot wire type. This device from e cigs factory is good for novice use and progression. The concept of temperature control equipment changed from concept to actual product. It was in the second half of 2015 that the technology was perfected and popularized in 2015.
Temperature control in simple terms is according to the heating heat wire resistance change after the monitoring, control heat wire heating process, the resistance changes from e cigs factory in temperature control heat wire heating is have certain rules to follow. The wire of the temperature control equipment is ni200 heating wire, ti heating wire, 316 stainless steel wire for temperature control heating wire, and most of the temperature control USES ni200 heating wire. The essence of temperature control is still the power output heated to atomized smoke oil, but control to different methods. Briefly, the principle of pressure regulating and temperature control. Which one is better for you? Here to share the author use down feeling, everybody play electronic cigarettes selected equipment to throw the appearance, see the essence, just want to make the difficulty of the coil, used to adjust find ways to taste, playability and smoke, there is stability. Everyone is concerned about the difference between temperature control and temperature control.
The most commonly used equipment for regulating pressure is the heating wire of contel A1, which can also be called power equipment. Regulating devices using kang thayer A1 heat wire production passes through winding, and on silk, burning coil, shaping, this several manufacturing processes, each program has a corresponding to the main point, skilled, the difficulty of production also is less.
The temperature e cigs factory control is divided into three steps: winding (ni loose), shaping, and silk, which are enough. The temperature controlled heating core is a little bit easier than the pressure adjustment.
But complex lies in the choice of the atomizer structure temperature control, temperature control equipment of the atomizer structure is very picky, temperature control requirements to the stability of the resistance is very high, so the production temperature control atomization core is relatively simple, but must pay attention to e cigs factory the place. After the installation, the stability of the heating wire, the uniformity of the heating wire and the clearance, etc., are the places to be noticed by the temperature control. There are different difficulties in making the production. It is more simple to know who is easier. But it’s still better than the playability. Because a lot of players know, fancy silk, dripping oil, and so on are using contel’s heating wire, and use the pressure regulating equipment. Temperature and voltage regulation in looking for the taste and what is the difference between a pressure regulating device is looking for resistance, cooperation is the key on the power, different resistance, with a variety of power is to ourselves to try, the resistance of the different e cigs factory smoke oil use is not the same, so the fun of surge tank is, smoke the same oil resistance of different flavors and taste is different also. So everyone including the author is looking for our own e cigs factory manufacturer taste enjoyment.
To sum up, the temperature-controlled temperature control has its own characteristics, which is slightly easier to control from the difficulty of production. However, there are too many attentions after winding. On the palate of looking for temperature control for speed faster, but to find the range of taste much smaller, there are a lot of smoke oil in low power and high power performance is very good, the taste difference is very big. Just from the amount of smoke and taste, there are difference, regulating the smoke more towards violence, smoke particles to a larger, and temperature control of smoke is soft but full-bodied, smoke particles is small, so the decomposition to some taste is not the same. One thing that has to be said is that the use of a drip-oil atomizer is superior to the oil storage atomizer, especially the double hair, which is really intense, which many older players have tried. In terms of stability, the winner of the decision is the pressure regulating host, which has a wide range of adaptations, depending on how we match e cigs factory. And temperature control tends to chip. There are too many restrictions on temperature control and too many unstable factors. So, I think every pattern has its own meaning, and it has its own characteristics. You just have to find the right one for you.